|
|
|
FOR SALE VC5-B-10 Reversing 20-High Cluster Mill |
Interested parties please contact Mr. John Herbst jfh1152@aol.com
Mill Section................................................................. VC5-B-10"
Mill Type..................................................................... Reversing 20-High Cluster Cold Strip Mill
Material...................................................................... Beryllium Copper Alloy (C17000, C17200, C17500, C17510)
Strip Width
Maximum............................................................... 9 in.
Minimum................................................................ 3 in.
Entry Gauge Maximum................................................ 0.060 in.
Exit Gauge Minimum................................................... 0.012 in. (0.30 mm)
Maximum Coil Size (Winder)........................................ 20 in. I.D. x 21.5 in. O.D. x 13 in. L.
Maximum Coil Weight
Absolute Coil Weight............................................... 4050 lbs.
Mill Speed................................................................... 300 / 600 FPM
Mill Rolls
Work Roll Nominal Diameter.................................... 1.5 in.
1st Intermediate Nominal Diameter........................... 1.6 in.
2nd Intermediate Nominal Diameter.......................... 2.724 in.
Mill Bearings
Diameter................................................................ 4.724 in.
Mill Power................................................................... 150 HP,850/1700 RPM
Winder Power.............................................................. 150 HP, 650/1600 RPM
Winder Mandrel Type................................................... Collapsible Reverse Pyramid
Winder Gearbox Ratio.................................................. 13.9:1
Winder Tension
Maximum............................................................... 8250 lbs. to 600 FPM
Coolant System .......................................................... Mineral Oil
|
For additional information on this mill please contact John Herbst at jfh1152@aol.com |
